14电动平地机
引擎
- Base Power (1st Gear) - Net
- 238HP
- 发动机模型
- 猫C13
- 生
- 5.1in
- 中风
- 6.2in
- Speed at Rated Power
- 1850转
- Standard - Fan Speed - Maximum
- 1600转
- 注意(5)
- 猫 engines equipped with a Selective 猫alytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
- 注意(4)
- Power as declared per ISO 14396. 额定转数1,850. VHP+ = 228 kW (306 hp)
- Standard - Fan Speed - Minimum
- 550转
- 注意(1)
- 净功率按ISO 9249测试, SAE J1349, 在制造时有效的EEC 80/1269标准.
- 最大高度-全功率(Tier 2)
- 12049ft
- 最大高度-全功率(Tier 3)
- 14349ft
- 排放
- Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
- Maximum Torque - VHP Plus
- 1137磅/英尺
- Maximum Altitude - Full Power
- 13900ft
- 转矩上升
- 41%
- 注(2)
- 优化的VHP Plus是14M3的标准配置.
- 标准功能
- 122°F
- 注(3)
- 广告中的净功率是指额定转速为1时的可用功率,850转, 当发动机装有风扇时，在飞轮处测量, 空气滤清器, muffler and alternator.
- 位移
- 763年³
- 气缸数
- 6
权重
- 操作重量-典型配置
- 57250lb
- 请注意
- *基本操作重量计算的标准机器配置与20.5个R25轮胎，满油箱操作员和ROPS驾驶室.
- 车辆总重量-基础* -后桥
- 36994lb
- 车辆总重量-典型装备-前桥
- 15245lb
- 车辆总重量-典型装备-后桥
- 42005lb
- 车辆总重量-典型装备-总
- 57250lb
- 车辆总重量-基础* -前轴
- 13994lb
- 车辆总重量-基数* -总重量
- 50980lb
推板
- 叶片宽度
- 14ft
- 弧半径
- 16.3in
- 喉咙间隙
- 4.6in
- 刀片高度-无切削刃
- 23in
- 叶片宽度 - Without End Bits
- 164in
- 刀片高度-带切削刃
- 24.9in
- 叶片宽度 - With End Bits
- 169in
叶片范围
- 最大切割深度
- 23.3in
- Blade Tip Range - Forward
- 40°
- 最大肩距轮胎外-左
- 73.6in
- 推板 Sideshift - Left
- 29.1in
- 推板 Sideshift - Right
- 31.1in
- 最大肩伸到轮胎外-对
- 78.9in
- Blade Tip Range - Backward
- 5°
- Circle Centershift - Right
- 20.5in
- Maximum Lift Above Ground
- 16.5in
- Circle Centershift - Left
- 25.6in
空调 System
- 空调
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4磅)的制冷剂，其二氧化碳当量为2.860公吨(2.76吨).
服务 Refill Capacities
- 油箱
- 109.9加(美国)
- 冷却系统
- 15.9加(美国)
- 圆开车
- 1.8加(美国)
- 液压系统
- 33加(美国)
- 柴油排气油箱(仅限第4层)
- 5.8加(美国)
- Transmission and Differential
- 23.5加(美国)
Frame
- 前轴-每侧总振荡
- 32°
- 前轴-车轮倾斜-左/右
- 17.1°
- Circle - Outer Diameter
- 71.7in
TECHNOLOGY THAT GETS WORK DONE
- Optional 稳定的叶片 improves grading precision by decreasing engine speed at 15 percent intervals when machine bounce is detected then increases 发动机转速 systematically when grader stabilizes.
- Optional 猫 Grade with 横坡 helps maintain desired cross slope by automatically controlling one side of the blade.
- 可选猫级澳门新葡京博彩定位和制导技术, 机传感器, 和自动刀片控制，以帮助获得等级更快, 更容易, and more efficiently.
- Optional 自动发音 allows you to articulate automatically while steering in tight spaces or around curves, 障碍, 与逆转.
- Manage your fleet of machines while reducing fuel burn with 猫 Production Measurement System option. The Efficiency Coach and Application Segmentation work together to monitor operators and machines simultaneously. Measure your jobsite’s efficiency and productivity from anywhere on the website.
MOVE MORE, BURN LESS
- 猫C13 engine meets U.S. EPA Tier 4 Final/EU Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent emission standards, 取决于具体国家的排放标准.
- Standard Economy Mode can be turned on to limit maximum engine speed which helps reduce fuel consumption.
- 标准VHP Plus在所有齿轮中提供理想的功率量.
- Standard Automatic Differential Lock unlocks differential during a turn and re-locks when straight for 更容易 operation and improved power train protection.
MORE CONTROL AND EFFICIENCY
- Load-sensing system and advanced electro hydraulics give operator superior implement control and hydraulic performance.
- Proportional Priority Pressure-Compensating valves have different flow rates for head and rod ends of cylinder so machine responds consistently and predictably.
- Balanced hydraulic flow is proportioned to ensure all implements will operate simultaneously without slowing engine or speed of some implements.
DESIGNED FOR OPERATORS
- 简单的, 直观的操纵杆控制取代了杠杆, 因此，手和手臂的运动减少了78%, helping reduce operator fatigue.
- Optional Advanced Control Joysticks allow operator to control automated grading solutions efficiently and safely without removing hands from the joysticks.
- 可选择的叶片提升模式-很好, 正常的, 或粗-允许操作员匹配应用要求.
- Articulation Return-to-Center automatically returns machine to a straight frame position from any angle with the touch of a button.
BUILT-IN SAFETY FEATURES
- 选配后视摄像头，增强机器后方视野.
- 电气断开和发动机关闭开关在地平面.
- Operator Presence System keeps parking brake engaged and hydraulic implements disabled until operator is seated and machine is ready for operation.
- Hydraulic Lockout disables all implement functions while still providing machine steering control – especially useful while roading.
- 选配安全带指示灯，促进安全操作习惯.
SAVE MAINTENANCE TIME
- Convenient access from the top of the circle to the patented top-adjust wear strips and inserts make them easy to add or replace.
- Shim less 推板 Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter and precise blade control.
